Products
Factory
Plot No. 29,
G.I.D.C. Industrial Estate, NH No. 8,
POR - Ramangamdi.
Vadodara - 391243
Ph : +91 (0265) 2830375, 2830975
Water Softening Plant
Your Satisfaction is our reputation
Naturally occuring water can be regarded as a very dilute solution of various salts all water containing Calcium or Magnesium salts in considerable amount are called 'Hard' Water. Such Hard Water when heated the calcium & Magnesium will deposit a hard scale in pipes, heating coils, Boilers etc. With consequent loss in efficiency and a proprtionate waste of fuel and ultimately money.
- Main M.S. Pressure vessel with top and bottom strainer plants supported on M.S. Supports
- Painted internally with bitumastic paint and externally with attractive finish
- Frontal ilnter connecting pipings with G.M./C.I. (Screwed End/Flange End) Diaphragm valve and sample Cock
- Brine suction assembly with ejector
- Pressure gauges at inlet and outlet
- Initial charge of High Exchange capacity ion exchange Resins
- Testing kit
- Operation Manual
- Boiler Feed
- Textile Processing
- Dyes and Chemical Manufactures Hotels
- Hospitals
- Air Conditioning Plants
- Ice Plants
- Cooling Water make up
- Power Plants
- Soft Drink Beverages
- Dairies
- Chilling Plants
- Compact and Economical design
- Easy installation, little space, simple working, no skilled labour
- Reduction in fuel consumption and improved efficiency
- Prevents scale formation, Reduces Dyes, Chemical & Auxiliaries consumption
- Very less maintenance and running cost
- Uses high exchange capacity Resins
Removal of hardness from water is called softening. The softening is done by ion exchange process. The ion exchange process relies on the replacement of the Calcium and Magnesium ions in the water by an equivalent number of Sodium ions. This eliminates the unwanted characteristics of hard water because the sodium salts neither form scale nor a scum with soap out only lather. The resin will take up the Calcium ion to the extent of what sodium ions the Resin will have with it. Therefore, to give new sodium ions to the Resin, the cheapest and easiest means would be to pass the solution of Sodium chloride (common-salt) through the Resin. The same resin can be used over and over again to produce the soft water a- periodic dosage of Sodium chloride (common salt) solution. So, recurring cost in such process is only the cost in such process is only the coast of common salt.
Technical Specifications of
Water Softening Plant
