Products
Factory
Plot No. 29,
G.I.D.C. Industrial Estate, NH No. 8,
POR - Ramangamdi.
Vadodara - 391243
Ph : +91 (0265) 2830375, 2830975
Oil / Gas Fired Thermic Fluid Heater [Horizontal / Vertical]
Fully Automatic Vertical and Horizontal, High Fuel Efficiency, Instant Heating, Non-IBR, Easy Maintenance, Low Budget Equipment, Indian Boiler Regulation not Required
Construction and Function of Entherm
Thermic Fluid Heating system is a fully automatic packaged, oil/gas fired 3 pass heater in which Thermic fluid can be heated upto 300° C almost at atmospheric pressure. Thermic fluid heater is a closed circuit unit in which a hot thermic fluid is circulated. The heat is transferred to process through a heat exchanger in user equipment.
Heat Exchange
The integral combustion chamber is provided with concentric helical tube coils, placed in double shell of mild steel construction, allowing flue gases to pass thrice, thus ensuring optimum heat release and maximum heat transfer, due to top elimination of extensive use of refractory, it permits rapid start up operational and maintenance flexibility.
Technical Specifications of
Oil / Gas Fired Thermic Fluid Heater
Instrumentation and controls
Thermic Fluid is fully automatic and safe for a unattended continuous operation. This is possible only due to reliable instrumentation and controls incorporating in the system. Every safeties are interlocked giving an indication by flowing lamps on control box audio visual alarm.
Major Controls and Safeties
Flame sensor, Photo-electric cell operated audio-visual alarm and automatic burner cut-off, high temp. Burner cuts off giving an audio-visual alarm, low flow of thermic fluid, differential pressure switch operated audio-visual and burner cut-off, low fuel temp. (in case of F. O.) burner cuts off due to low temp. and audio-visual alarm, low thermic fluid level (In expansion tank) burner cuts off due to level audio-visual alarm.
Low Budget Equipment no Indian Boiler Regulations
Thermic Fluid is a pressure less liquid phase heater and it is outside the preview of Indian boiler regulations. No statutory inspection are required eliminating the need for a shut-down of the process. No corrosion or scale formation. The heat transfer used in the thermic fluid are of mineral origin and do not contain any dissolved solids, which causes corrosion of lead to scale information.
The Thermic Fluid Pump
The high temp. centrifugal pump circulates the hot thermic fluid at the required capacity and head, the pump is provided with colling jackets, Graphoil packaging coupled with suitable electric motor.